Voice calls, instant alerts, and full boat monitoring — all on your phone.
Monitor bilge, batteries, Victron systems and vessel location all with remote control.
Subscription Free app.
Boat Monitor 32 consists of two parts:
The Hardware
A compact device installed on your vessel.
It connects to the systems you want to monitor or control, and sends data securely over the internet.
The App
Runs on your phone and keeps you connected to your boat wherever you are.
Receive instant alerts and notifications
View live data, including Victron devices
Analyse trends with built-in graphs
Set alarm thresholds
Remotely control onboard systems
Configure your hardware easily from the app
Boat Monitor 32 Hub With An NMEA0183 Input / GPS Input
Boat Monitor 32 Hub Without NMEA0183 / GPS Input
The Hardware
Overview
Boat Monitor 32 is designed for simple mounting and installation on 12V and 24V DC marine electrical systems.
The device provides:
8 configurable inputs
4 configurable outputs
All inputs and outputs are configured and managed using the Boat Monitor 32 mobile app.
Input Monitoring
Inputs can be connected to a wide range of onboard systems and sensors, including:
Battery voltage monitoring
Bilge pump and bilge switch status
Alternator signals
Oil pressure and temperature warning switches
Fire alarm panel outputs
PIR and security sensors
Output Control
Configured outputs may be used to operate external devices such as:
Bilge pumps
Warning beacons and indicator lamps
Heaters
Refrigeration systems
Solenoid valves
Generator start or auxiliary control circuits
(External devices must be correctly rated and installed in accordance with manufacturer recommendations.)
Integrated Sensors
Boat Monitor 32 also includes onboard environmental and motion sensing:
6-axis motion sensor for pitch and roll monitoring
Temperature sensor
Humidity sensor
Atmospheric pressure sensor
NMEA0183 Isolated Input along with TTL input for a GPS Puck (Hubs with NMEA / GPS. option only).
Victron Bluetooth Integration
Boat Monitor 32 supports Bluetooth integration with compatible Victron devices, allowing supported Victron data to be viewed directly within the Boat Monitor 32 app when correctly configured.
Notifications, Emails and Voice Calls
Know the moment something goes wrong. Receive instant notifications on your phone for key events like bilge activity, low battery, or movement. Upgrade with our subscription service to unlock email alerts and automated voice calls — so your boat can reach you wherever you are, even if you’re not looking at your phone.
The Boat Monitor 32 mobile app is available on the Apple App Store and Google Play Store. A compatible smartphone or tablet is required.
The app allows you to:
Receive alerts and notifications directly to your mobile device
View live system data
View and graph historical data
Manually operate configured outputs
Configure inputs, outputs and alert settings
Configure voice call and email alerts
The App
How do I install it and make it work?
Support & Requirements
Full product documentation is available online, and technical support is available to help you get the most from Boat Monitor 32. We can provide installation guidance and assist with remote configuration where required.
Basic electrical wiring skills are required for installation. The minimum connection requirement is two wires (positive and negative) to power the device. This enables monitoring of battery voltage, temperature, humidity, air pressure, pitch and roll.
Internet Connectivity
Boat Monitor 32 requires an internet connection via onboard Wi-Fi or marina Wi-Fi. If Wi-Fi is not available, a mobile 4G router or hotspot can be used. Suitable devices are widely available from approximately £30, with data plans starting from around £4 per month (provider dependent).
Mobile Device Requirement
An iOS or Android smartphone or tablet is required to use the Boat Monitor 32 companion app.
Victron Products
Viewing Victron Bluetooth Data
Viewing live and historical data from supported Victron Bluetooth devices is simple:
Use the VictronConnect app to obtain the device MAC address and encryption key.
Enter these details in the Boat Monitor 32 app and send the configuration to the device.
Once configured, Victron data is available within the Boat Monitor 32 app.
This allows you to monitor your Victron systems remotely whenever your vessel has an internet connection.
Instant Notifications, Voice and Email Alerts
Boat Monitor 32 sends instant notifications, voice call alerts, and emails when an alarm condition is detected or communication with the device is lost. All alerts are configured within the Boat Monitor 32 app.
You can add up to five phone numbers for voice alerts. In the event of an alarm, each number is called in sequence until the alert is acknowledged.
Voice call and email alerts are available as an optional subscription.
Instant push notifications are included free with the app.
Returns and Warranty
We want you to be completely satisfied with your purchase. If for any reason you are not happy with Boat Monitor 32, we offer a 30-day no-quibble returns policy.
Returned items must be sent back within 30 days of delivery. Refunds exclude postage and packaging costs unless the product is faulty.
Boat Monitor 32 is supplied with a 12-month warranty covering manufacturing defects and hardware failures under normal use.
This warranty does not cover water or moisture damage, incorrect installation, misuse, modification, or accidental damage.
This warranty does not affect your statutory consumer rights.
Shipping
Shipping costs are automatically provided for the UK and Ireland. If you are located elsewhere then please contact us and we will provide a shipping quote.
Featured Products
Boat Monitor 32 Hub Without NMEA0183 / GPS Input
Boat Monitor 32 Hub With An NMEA0183 Input / GPS Input